How to Install WildFly
January 28, 2019

How to Install WildFly 14 on VM Instances and Docker Containers

Containers
Virtualization

This blog is intended for DevOps/JEE developer focus audience. Please ensure firewall - disable/enable commands (if issued in production systems) align with the best practices and guidelines at your site. This blog instructs to expose ports 8080 and 9990 for conventional use of Wildfly OSS product.

Additionally, if you prefer not to disable SELinux, please refer to the audit2allow/audit2why toolset to identify and correct areas where/why Wildfly is being blocked by SELinux. This is just in case a policy change is required to ensure that the operations being permitted does not pose a security threat.

In order to install WildFly 14, we will use Oracle VirtualBox to create a vmdk and install the Red Hat CentOS 7 iso image.

Use setenforce 0 to enter permissive mode:


setenforce 0

 

Then use systemctl to stop and disable the firewall daemon:


systemctl stop firewalld
systemctl disable firewalld

 

In order to access the vm from a network terminal rather than a console, run the dhclient as superuser:


sudo dhclient

 

Update the distro, install wget and ntp, set your timezone without using root user privileges, and create an openlogin login {ol} and add it to the wheel group for sudo privs:


yum update
yum install wget
sudo useradd ol -m
sudo passwd ol
sudo usermod -aG wheel ol
sudo yum install ntp
sudo timedatectl set-timezone America/Los_Angeles

 

Install the openjdk version "1.8.0_191" with devel. (This is important!)


sudo yum install java-1.8.0-openjdk
sudo yum install java-1.8.0-openjdk-devel
install  wget-1.14-15.el7_4.1.x86_64
install unzip
install nano-2.3.1-10.el7.x86_64

 

Finally, you are ready to install WildFly 14:


wget http://download.jboss.org/wildfly/14.0.1.Final/wildfly-14.0.1.Final.zip
sudo unzip wildfly-14.0.1.Final.zip -d /opt/

 

Now we need to edit the conf file:


sudo nano /opt/wildfly-14.0.1.Final/bin/standalone.conf

 

Add:


JBOSS_HOME="/opt/wildfly-14.0.1.Final"

 

You can start WildFly 14.0.1 in its simplest configuration with standalone.xml:


sudo ./standalone.sh -b=0.0.0.0 -bmanagement=0.0.0.0

 

You can also start WildFly 14 with an alternate configuration:


sudo ./wildfly-14.0.1.Final/bin/standalone.sh --server-config=standalone-full-ha.xml

 

Now you are ready to add user to the WildFly application server:


./add-user.sh
[ol@localhost bin]$ sudo ./add-user.sh

What type of user do you wish to add?
 a) Management User (mgmt-users.properties)
 b) Application User (application-users.properties)
(a):

Enter the details of the new user to add.
Using realm 'ManagementRealm' as discovered from the existing property files.
Username : ol
Password recommendations are listed below. To modify these restrictions edit the add-user.properties configuration file.
 - The password should be different from the username
 - The password should not be one of the following restricted values {root, admin, administrator}
 - The password should contain at least 8 characters, 1 alphabetic character(s), 1 digit(s), 1 non-alphanumeric symbol(s)
Password :
WFLYDM0099: Password should have at least 8 characters!
Are you sure you want to use the password entered yes/no? yes
Re-enter Password :
What groups do you want this user to belong to? (Please enter a comma separated list, or leave blank for none)[  ]: ManagementRealm
About to add user 'ol' for realm 'ManagementRealm'
Is this correct yes/no? yes
Added user 'ol' to file '/opt/wildfly-14.0.1.Final/standalone/configuration/mgmt-users.properties'
Added user 'ol' to file '/opt/wildfly-14.0.1.Final/domain/configuration/mgmt-users.properties'
Added user 'ol' with groups ManagementRealm to file '/opt/wildfly-14.0.1.Final/standalone/configuration/mgmt-groups.properties'
Added user 'ol' with groups ManagementRealm to file '/opt/wildfly-14.0.1.Final/domain/configuration/mgmt-groups.properties'
Is this new user going to be used for one AS process to connect to another AS process?
e.g. for a slave host controller connecting to the master or for a Remoting connection for server to server EJB calls.
yes/no? yes
To represent the user add the following to the server-identities definition 

 

WildFly runs on port 8080 and 9990, so you will need to allow this port to access WildFly from an outside network. Domain API: http://:9990/management Admin Web Console: http://:9990/console You can do this by running the following commands:


sudo firewall-cmd --zone=public --add-port=8080/tcp --permanent
sudo firewall-cmd --zone=public --add-port=9990/tcp --permanent
sudo firewall-cmd --reload

 

You are now ready to access WildFly:

WildFly

But wait! We need to configure JDBC connection to access an external postgres server! Click here for the current version of the JDBC driver.

WildFly

Go to /standalone/configuration directory in your WildFly installation directory. Open standalone.xml. (It's the default configuration file used by the standalone server.) Search "datasource" to go to the right part. In the <datasources> element, you need to add both <driver> for PostgreSQL and <datasource>: 

WildFly

Almost done. We also need to add Listener for mod_jk incoming requests:

<server name="default-server">
               <ajp-listener name="defaultajp" socket-binding="ajp"/>
               <http-listener name="default" socket-binding="http" redirect-socket="https" enable-http2="true"/>

 

By the way - a quick dirty container route without the integration configurations is also possible, as annotated here... https://raw.githubusercontent.com/kwart/dockerfiles/master/wildfly-ext/docker-entrypoint.shhttps://raw.githubusercontent.com/jboss-dockerfiles/wildfly/master/Dockerfile Build the docker image as follows...


docker build -t wildfly14.0.1:latest .
docker build -t registry.openlogictest.local:5000/wildfly14.0.1:latest .
docker login registry.openlogictest.local:5000
PS C:\Users\s.b\Documents\docker_builds> docker login registry.openlogictest.local:5000
Authenticating with existing credentials...
Login Succeeded

 

Next, we push the image to a registry and tag it!


docker push registry.openlogictest.local:5000/wildfly14.0.1:latest
docker tag wildfly14.0.1:latest registry.openlogictest.local:5000/wildfly14.0.1:latest

 

On slow networks for big Docker images, it is possible to get TLS handshake timeouts:

WildFly

On inspection, the Docker image shows up as follows:


PS C:\Users\s.b\Documents\docker_builds> docker image inspect registry.openlogictest.local:5000/wildfly14.0.1:latest
[
    {
        "Id": "sha256:a7a00b9866143222403e151fcfcae14be45ee1293a5807036106e4b0f5483d6b",
        "RepoTags": [
            "wildfly14.0.1:latest",
            "registry.openlogictest.local:5000/wildfly14.0.1:latest"
        ],
        "RepoDigests": [
            "registry.openlogictest.local:5000/wildfly14.0.1@sha256:4b73aeeb661a4a9e57db8d5dda3418baa3ba1338b7054d34249993c8cde09387"
        ],
        "Parent": "sha256:c9fc8026cd537929889307d0b3b2af666de341819758c7ad091da553d7c96a38",
        "Comment": "",
        "Created": "2018-12-09T07:06:39.5334145Z",
        "Container": "fdabd105bcce8d87a0347b8d9f3a60463571838e5d07fb1d062770f1807a9580",

 


PS C:\Users\s.b\Documents\docker_builds> docker image list
REPOSITORY                                        TAG                 IMAGE ID            CREATED             SIZE
wildfly14.0.1                                     latest              a7a00b986614        3 hours ago         651MB
registry.openlogictest.local:5000/wildfly14.0.1   latest              a7a00b986614        3 hours ago         651MB
activemq5.15                                      latest              dbeded55f300        8 hours ago         570MB
registry.openlogictest.local:5000/activemq5.15    latest              dbeded55f300        8 hours ago         570MB
httpd246                                          latest              6265b75efecd        23 hours ago        258MB
registry.openlogictest.local:5000/httpd246        latest              6265b75efecd        23 hours ago        258MB
postgres11.1                                      latest              c1551be063ce        24 hours ago        71.7MB

 

Your mileage will vary...as mine did on the command prompt with CentOS and Windows 10! Have fun with this! And don't forget.... Our open source architects are available to assist you with this and other popular open source solutions!

GET SUPPORT